Embedded Files
StageFighter (v6)
This compact and durable product allows you to control 4 channels of addressable LEDs for demanding projects. It offers both wired and wireless connectivity and can be powered from a single DC power source like USB-C battery packs. An programmer is required to flash it over USB (ESP Flasher for W32-ETH01). Designed for 4 Amps and 12V (other voltages are possible)
Features
4 LED Output with 3.5mm Screw Terminals (3 Pin - Data - No clock)
Cable Guard ready!
Level shifter based
Power Input over USB-C (12V) or XT-30 (more adaptors available)
Size 80x32x27 Weight : 56g
Sold as DIY or ready-to-go Kit
Lighthouse (v1)
This open-frame design allows you to control 8 Channels of addressable LEDs (Data - No clock) . All this connected to a wired or wireless network and running from single DC power source.
Many possibilites for controll available like Infrared Remote or Audio Reactive (Line In or Mic buy separetly).
This device fits without hassle in a enclosure. Supports high currents.
🛒 Not yet available
2 versions available
Simple Circuit level shiffter based (for normal use)
Extra layer of safety: isolated protected led outputs & audio input
Size 193x60x15mm Weight approx. 100g
Custom surge and output protection circuit
Features
Ready to connect potentiometer, LDR, ...
USB-C to control and program
Cable Guard Ready
Sold as DIY or ready-to-go Kit
RGBSwarm (v2)
RGBSwarm (v2)
A single-output device with a design goal of cost and space savings. This controller allows you to connect your single LED strip to a standard DC Barrel Plug to power it. It integrates CableGuard to protect your wire harness against broken wires. The controller fits perfectly into a heatshrink tube to make it more durable and rainproof. Delivered with WLED. An external programmer is needed to flash it over USB. The specifications handle around 2 Amps.
🛒 Not yet available, but Open Source (Production files) available on Github
Features :
1 LED Output with CableGuard (Data)
InfraRed Receiver (IO35)
Size 80x32x27 Weight : 56g
Sold as DIY or ready-to-go Kit
USB-C to control and program
Size 193x60x1,5mm Weight approx. 50g
Sold as DIY or ready-to-go Kit
Micro Fighter
Micro Fighter
This smallest RGBFighter product ever build. It requires only a micro usb to turn allows you to control 4 Channels of addressable LEDs. All this connected to a wired or wireless network and running from single DC power source like USB-C Battery Packs. legacy Micro US
Size (Board) : 32x14mm
🛒 Not yet available, but Open Source (Production files) available on Github (WidgetEsp8266RGBv4Strip)
Accessories
Accessories
For more Information, please contact us by
Page updated
Google Sites
Report abuse